Dobco Equipment - Torque Management

2430 Lucknow Drive, Mississauga, Ontario. L5S-1V3 Phone: 905-672-5557 Fax: 905-672-5559

Canadian Master Distributor for Ingersoll-Rand Fastener Tightening Systems Products

Proudly Presents

Precision Torque Management Systems for Assembly

Beyond just product, Dobco's extensive capabilities help you before, during, and after your line or work area is configured for production. Presented here is IR Assembly Solutions' portfolio of products and services specifically tailored to the modern assembly environment. Whether your business is assembling motor vehicles, automotive components, aircraft systems, appliances, office furniture, or consumer electronics, there is solution from IR that will meet your needs and exceed your expectations.

Fastener Tightening Systems

Joining components in today's industrial environment is much more than putting wrench to bolt. It's about finding a solution that links the operator and the joint and delivers unparalleled accuracy and repeatability. Dobco Equipment has a superior knowledge of the threaded fastening process, acquired through years of application work with the world's leading manufacturers in the motor vehicle, aerospace, appliance, and electronics industries. We understand the interface of the tool and operator - and know how to leverage the power of ergonomically-designed equipment to maximize productivity.

Accuracy in the assembly process is crucial, especially when you consider everyone who will rely on those assemblies once they’re in place. And with the new QE Series it’s an attainable goal.

The QE Series DC electric nutrunners from Ingersoll-Rand are the first in a new generation of assembly tools that deliver industry-leading accuracy and repeatability all in smaller, lighter, faster packages.

Coupled with the Insight IC control system, QE Series tools employ advanced motor technology to quickly reach specified torque, with easy handling that enhances productivity. The ergonomic tool design and comfortable front and rear grip surfaces complement the controller’s clear displays and intuitive controls to help make operators an integral part of quality assurance

QE4AT Series, QE6AT Series, QE8AT Series

QE4AT Series Maximum Torque 34Nm²

QE6AT Series Maximum Torque 80Nm²

QE8AT Series Maximum Torque 400Nm²

Recommended for highly critical applications or applications with unique or difficult tightening requirements. These are more accurate tightening requirements such as yield or angle control, multiple step tightening, or applications where a variety of different torques are needed at the same station.

QE4 TS Shown

·	Torque Range 2 - 25 Nm
·	Max. Speed 1820 RPMs
·	Weight 1.2 kg
·	Length 390 mm

Easy to read, Large Color Graphics Display

Barcode interface capable

   Universal power supply
    120 or 230 Volt operation

  Multiple Communication interfaces
    Ethernet
    Serial
    Parallel
    Field bus
    I/O

  Plug n Play with QE Series tools and motors
    Automatic tool recognition
    One step tool change

  50º C Operating Range
    Operation in hot environments

  Single or dual Spindle Capability
    Versatile one or two tool operation from single controller

  Easy Programming
    Two Key press operation
    Quick setup menus

  Multiple Tightening strategies
    All common tighten strategies
    Special strategies drag torque

Ingersoll-Rand ETW Torque Audit Wrench

The Expert Audit Wrench Features:
A digital torque audit wrench using bending beam technology
along with a proprietary torque algorithm.

Torque Audit Mode Instant method (Measuring residual torque).
This method measures the residual torque dynamically in the fastenening direction by capturing torque as the fastener is rotated through a small, pre--set angle, usually 2° to 4°. The proprietary dynamic torque algorithm enables the ETW Series Audit Wrench to ignore the initial peak torque required to overcome static friction as the fastener begins to turn. At the same time it effectively removes operator influence from the audit process. Friction and operator influences are two key sources of measurement variation.

The new Ingersoll-Rand ETA Series Expert Torque Analyzer is designed for use with a broad new range of transducers to dynamically measure and record the torque output of all types of fastening tools, including pulse tools. The Expert Torque Analyzer has full statistical capability, and all data can be downloaded to a computer via the RS232 port. The full line of joint kits facilitates testing of fastening tools in the tool crib, quality lab or on the line.

This newsletter was sent by: Dobco Equipment Ltd.
2430 Lucknow Drive, Mississauga, Ontario. L5S-1V3 Phone: 905-672-5557 Fax: 905-672-5559